Carl Ramsey
Member
- Joined
- Dec 3, 2013
(1987 Stock Regal Turbo) My stock FPR (no vacuum) reads 36psi on the small gauge on the end of my cars injection manifold. I purchased a new Accufab FPR and plugged it in place of my stock FPR and read 0psi fuel pressure. I adjusted the center rod from all the way out to all the way down but see no reading. I replace it with the stock FPR and see 36psi. (Obviously with the fuel pump on in all instances) No obvious problem I can see at the inlet or outlet but sent back to Accufab for check. It checks good on their test bench, so they ship it back. I swap it back in place of stock and still have no fuel pressure showing so back to stock to drive the car.
Anyone in the Houston area have a stock turbo car I can swap this into to test it or have any other trouble shooting tips?
Anyone in the Houston area have a stock turbo car I can swap this into to test it or have any other trouble shooting tips?