I've been waiting a very long time to finally build the fuel system for my Stage 2 car. I really wish someone would make a nice sumped tank for us guys that want to use an external pump set up but would rather not weld our tanks for possibility of rust. I've contacted Spectre to see if they could make us something with the stock top and a sumped bottom that will have factory coatings inside. Well, no luck.
I spoke with Paul Castle a couple years back about forming a plastic tank with a sump, no luck.
So, now I'm getting a little frustrated. I wont weld my tank. We welded a sump in one tank and this car gets a lot of use on it. The injectors, after many many miles were sent to Chuck Leeper and they were filled with metal and rubber. The metal may have been from an external pump that failed but we cant verify that. The tank was originally coated with Eastwood's coating after the sump was installed. Major NO NO. This filled the filter up with sheets of the coating.
I've seen the custom made pick ups listed for external pump use. These look nice but I'm a little concerned with possibilities of cavitation and running the pump dry on start up.
So, after all this wait, since we cant get any sumped tanks (besides the bare aluminum), I think the best option is the Racetronix hangers for double pumpers with the -8 and -6 lines.
What have the best numbers been with these lines so far? High 9's from what I have read. Anybody been faster?
I spoke with Paul Castle a couple years back about forming a plastic tank with a sump, no luck.
So, now I'm getting a little frustrated. I wont weld my tank. We welded a sump in one tank and this car gets a lot of use on it. The injectors, after many many miles were sent to Chuck Leeper and they were filled with metal and rubber. The metal may have been from an external pump that failed but we cant verify that. The tank was originally coated with Eastwood's coating after the sump was installed. Major NO NO. This filled the filter up with sheets of the coating.
I've seen the custom made pick ups listed for external pump use. These look nice but I'm a little concerned with possibilities of cavitation and running the pump dry on start up.
So, after all this wait, since we cant get any sumped tanks (besides the bare aluminum), I think the best option is the Racetronix hangers for double pumpers with the -8 and -6 lines.
What have the best numbers been with these lines so far? High 9's from what I have read. Anybody been faster?