JD thats some nice pictures!
Here is a pic of mine taken at the car wash last weekend. Not so stock.
Ok so what is size of the up pipe or pipe in green? My car is stock will a pipe that size hurt my car or add performance? I am running a stock intercooler.. The piece that is blue that comes off the turbo what size piece is that and what angle is it that it needs to come off there so that it clears everything.. My stock turd got caught in the alt... what size is the MAF pipe and will it hurt or gain performance...
The up pipe in green is a 3". A stock size is also available from the same vendor. I don't think there is much of a gain over the 2 1\2", Especially since there are adapters involved. It look good though.
The blue MAF pipe is 4", but that is because my turbo has a 4" inlet. Yours may vary, and again a stock size is available. I also run a Big Mouth Air filter.
All these parts are available from Mark at TR Custom Parts 84-87 Turbo Regals, 94-6 Impala SS, 93-up F Body Cars, Olds G-Body Cars, Late Model Corvettes, S-10 Blazers
You will be pleased with his service and goods. Just ask Mark what he suggests for your application. I highly recommend him.
everytime i see your car i never get bored of looking at it nice looking t.
The up pipe in green is a 3". A stock size is also available from the same vendor. I don't think there is much of a gain over the 2 1\2", Especially since there are adapters involved. It look good though.
The blue MAF pipe is 4", but that is because my turbo has a 4" inlet. Yours may vary, and again a stock size is available. I also run a Big Mouth Air filter.
All these parts are available from Mark at TR Custom Parts 84-87 Turbo Regals, 94-6 Impala SS, 93-up F Body Cars, Olds G-Body Cars, Late Model Corvettes, S-10 Blazers
You will be pleased with his service and goods. Just ask Mark what he suggests for your application. I highly recommend him.
It's close, but no problem. Had to use a Angle Boss for the IAC to get more clearance for the MAF pipe.Did you have any problems with the Up pipe clearing the 4" MAF pipe?
None.Did you have any issues with the up pipe clearing the 4" MAF pipe?