Looking to buy a neutral balancer for my new motor. I like to keep costs down and use good used parts if available. If not, I will have to buy a new TA one! I would be interested in a BHJ or something of that calibre if the price is right, but a TA or other unit is what I am looking for (cheaper). Let me know what you have.
Have a few things I can trade if needed!
Pushrods for GN1 heads/stock lifters (8.850 .080 wall)
Flat tappet springs with locks, etc. (I managed to get 115ish on the seat)
Stock rotating assembly, crank needs to be cut.
Two stock Intercoolers
Front and Rear blackout trim, used in good shape.
Stock 8445 heads with 100lbs springs. Could use a fresh-up.
Might have other parts from my parts car, let me know.
Have a few things I can trade if needed!
Pushrods for GN1 heads/stock lifters (8.850 .080 wall)
Flat tappet springs with locks, etc. (I managed to get 115ish on the seat)
Stock rotating assembly, crank needs to be cut.
Two stock Intercoolers
Front and Rear blackout trim, used in good shape.
Stock 8445 heads with 100lbs springs. Could use a fresh-up.
Might have other parts from my parts car, let me know.