Witch 4340 Crank do you Buy?

[Jeff Strube]

Witch 3.400 Crank do you Purchase that is a Bolt in with out having to Mod the Back Flange for the Flex Plate to Bolt on. Or having to Mode the Key way so the Balancer Bolts on or is there so Bigger Stroker Cranks that you can bolt in and not have to Mod anything for the Flex Plate or Balancer to Bolt on.

 

[Otto J]

I dont believe there is one out there the way you describe,They all come internal balanced.If you buy one from DLS with either stroke im sure you wont have any flexplate fitment problems but will still need to modify or replace the flexplate and balancer to external type for balancing not fitment

 

[S2V6RACER]

Here is Dans contact information if you need it.

Dan Strezo
DLS ENGINE DEVELOPMENT
886 East 900 North
Wheatfield IN 46392
dlsengine@hotmail.com
219-956-3653

 

[86brick]

I dont believe there is one out there the way you describe,They all come internal balanced.If you buy one from DLS with either stroke im sure you wont have any flexplate fitment problems but will still need to modify or replace the flexplate and balancer to external type for balancing not fitment

I thought that Nick Micale was getting the 3.400" stroke crank external balanced from Eagle.....

http://www.turbobuick.com/forums/showthread.php?t=194633