Wiring of SMC control box?

[YGETV8]

Hi All,

Got my dual nozzles and control box from Steve (Thanks!) to use with my existing DIY kit and am wondering about control box wiring. The instructions show the wiring going to the tank as being in a bundle (low alky, pump power, etc.), but I just need power to my pump from the box. Do I use the red and black "terminals" at the bottom a la the pics, or ground the pump and just use the red terminal on the box... help? Anybody know?

Am excited to try this out, but it will have to await my shift kit install! Am hoping these two items will wake my WE4 up! I was having BIG TIME stumble probs like Chad has mentioned with the NOS nozzles jetted too big and still ran 12.7@111.44 with a 2.1 60' first time on the new combo, so... we'll see.

Thanks a bunch!

 

[alkyman]

pump wiring

Jay:
You need to give the pump a constant 12 volts positive and use the black wire from the controller. It is a "modulated" ground. Gimme a call if you need help.
-Steve C.