What's the least work to Remove Core Support Bushings?

[gmmuscle]

Got a new set from G Body, and have part of the front clip apart. The top of the core bolts under the front fenders and it looks like there is no way to jack the support up enough to remove/install new, without removing fenders. Hope there is an easier trick????

Carl

 

[TRICKSIXPA]

If you took the header panel off good. The only thing I can think that you can do to cheat is unbolt/loosen the four bolts on the back end of the fenders by the door. One will be on top under the hood other two in the door jam and one will be under the car below the door hinge. I believe there is one more bolt under the hood hinges too that one will have to come out.
If you do both sides you should be able to move the core support up enough to replace the bushings. You will need to unbolt the bumper fillers and Air dam that runs under the fender as well cause they are connected to the bumper witch will not be moving during this process. I did this last year but took the whole front end off.