what are the best spark plug wires?

[williambavila]

Then everyone will tell him he has to run smart coils (that's also false) cheap ls coils with stock wires here mid 9s or faster.

Sent from my SM-G920T using Tapatalk

 

[turbo89]

Then everyone will tell him he has to run smart coils (that's also false) cheap ls coils with stock wires here mid 9s or faster.

Sent from my SM-G920T using Tapatalk

Stock ls coils are pretty stout.. 9's are. No issue for them

 

[~JM~]

TAYLOR Thunder Volt 50
10.4mm / 40 ohms per foot
Part #98024

30.75" = 92.9 ohms
28" = 84.3
25" = 75.1
25" = 74.1
24.5" = 73.3
24.5" = 71.1

There is a "quality inspection report" card inside the box.
Dated = 7/29/16
Inspected by: Linda

These wires look nice! They are fat though & will most likely require a special set of wire dividers. Taylor shows a set of 10.4mm wire dividers on their site. I have not installed the wires yet.

EDIT: Add Image

 

[earlbrown]

Linda does good work. I had some boxers one time that she inspected.

 

[~JM~]

Linda does good work. I had some boxers one time that she inspected.

The card is kind of funny. Doesn't state what the inspection consists of. I also thought of boxers & "Inspector #12".

 

[0-60n4]

I installed the Taylor thurnderbollt about 8 years ago and less than 5000 miles on then, I changed plugs this weekend and broke three wires removing them. The metal conductor that connects to the plug pulled out of the wire. And I was being careful I already ordered a set from highway stars. Any reason to go to something else on a street car with factory ignition?

 

[Chuck Leeper]

Firecore 50's.