Tsm Engine/parts

[GN/GTO]

I am switching my car over to a V8 (Buick 455) so I an selling all my V6 stuff. This engine has about 2 hours of running time on it. It blew head gasket in Reynolds back in November and needs two pistons. I believe the FAST system shut off fuel to the passenger side. ( its a bank to bank system). Everything is top shelf and is priced to sell. Call or E-mail with any questions
(386-795-0800)
Thanks, Don

109 TSM SHORT BLOCK
J.E. .020 PISTONS NEEDS 2
DSL STROKER KIT
RJC STUD GIRDLE AND CRANK WIPER
K-1 RODS
COMP ROLLER CAM 218/218 WITH R885 LIFTERS
NEW STYLE TIMING COVER
BHJ BALANCER
JW FLYWHEEL
ALL ABOVE BEING SOLD AS UNIT $3800.00

CHAMPION EXTREAM PORTED IRON HEADS
COMP BEEHIVE SPRINGS
T-D ROLLER ROCKER SHAFTS
TITANIUM RETAINERS $1800.00

CHAMPION PORTED STOCK INTAKE
CHAMPION FUEL RAILS (BOTH SHORT STYLE) *
RJC 70MM THROTTLE BODY WITH CHAMPION IAC RELOCATOR
PRECISION PLENUM
95 LBS PRECISION INJECTORS *
INTAKE COMPLETE WITH ALL ABOVE LISTED $1200.00
ARIZONA GN HEADERS----------SOLD
TERRY HOUSTON 3” DOWNPIPE-----------SOLD
ATR 3” SINGLE SHOT EXHAUST SYSTEM------------SOLD
MSD DISTRIBUTOR $100.00----call for details
WELDON 2015 FUEL PUMP WITH 10 MICRON AND 40 MICRON FILTERS $500.00 *
PRECISION 70 GTQ TURBO $800.00 *
4” AIR INTAKE AND THROUGH RAD SUPPORT AIR FILTER ---have deposit
JACK COTTON FRONT MOUNT INTER-COOLER---------SOLD
RJC POWER PLATE $25.00
CAM SENSOR WITH RJC KIT $100.00
STOCK COIL AND IGN MODULE WITH PLUG WIRESET $100.00

*= THESE ITEMS HAVE ABOUT TWO HOURS OF USE
ALL PARTS ARE "AS IS/WHERE IS" BUYER PAYS ALL SHIPPING

 

[precizion818]

Pm sent

 

[buickturbot]

intake

pm sent

 

[GN/GTO]

DISTRIBUTOR SOLD

 

[DGC]

Interested in

CHAMPION FUEL RAILS (BOTH SHORT STYLE) *
RJC 70MM THROTTLE BODY WITH CHAMPION IAC RELOCATOR
PRECISION PLENUM

Do you have a price? I'll comntact Tom Allen tomorrow regarding
'short style'. Not sure about short vs regular??

Thanks,
DGC

please pm if possible

 

[2toneNV]

What plenum does the RJC plate fit?

 

[GN/GTO]

Precision

 

[GNBeswick]

What ratio are those roller rockers?
Willing to seperate them at all?

 

[j_alstrand2000]

Don,
Extreme ported champion iron heads ha,Do you know what they flow at
500 lift?Let me know ok,Interested.
John

 

[84TXGN]

I'm interested in the intake if you are willing to eperate it from the rest. If so, name your price and shipping to 77018.

 

[GN/GTO]

Here is a list of whats left..

CHAMPION FUEL RAILS (BOTH SHORT STYLE) $150.00
RJC 70MM THROTTLE BODY WITH CHAMPION IAC RELOCATOR and IAC
$250.00
PRECISION PLENUM $50.00
95 LBS PRECISION INJECTORS $300.00
WELDON 2015 FUEL PUMP WITH 10 MICRON AND 40 MICRON FILTERS $500.00 *
PRECISION 70 GTQ TURBO $700.00
RJC POWER PLATE $25.00
CAM SENSOR WITH RJC KIT $100.00
STOCK COIL AND IGN MODULE WITH PLUG WIRESET $100.00

I have removed the A/C from the car so I have the compressor, hoses,condenser, evaporator, and the heater A/C box from under hood.

make me offers on any of that stuff

The 1964 Skylark (daily driver) is also for sale $7000.00, to see pictures click on my photos, E-mail me for pictures with the new paint job and interior pictures

 

[2GNS4ME]

how old is that cam sensor and is it ac/delco? do you have pics?

 

[asloan5]

I just sent money via paypal for the following items
power plate, precision plenum , 70mm throttle body w/champion iac adapter and iac

 

[pm87tb]

parts

CHAMPION FUEL RAILS (BOTH SHORT STYLE) $150.00
I sent you a email thanks..

 

[Louie L.]

Don,
I need to talk to you about the fuel pump and injectors. Ill call u

 

[GN/GTO]

Louie Who??? LOL

 

[GN/GTO]

Cam sensor is A/C Delco. Age unknown it was in the car when I bought it. That makes it at least 6 years. I put the RCJ kit in it three years ago. I can send you a picture later tonight. But it pretty much looks like a cam sensor...lol

 

[2GNS4ME]

no I hear ya but you always hear "like new condition" and when you get it ...well basically looks like crap. Happened to me before. Thanks though.

 

[Louie L.]

Louie Who??? LOL

Man that aint right..

 

[49-blues]

What is the comp height of the pistons? Would you know who has the 2 replacement pistons needed?