Finally went to the track and bolted on my slicks (ET drags 28x10.5 with a 8.5 inch rim) I was launching lightly with about 5-6 pounds of boost, I was getting 1.7-1.8 60 foot times. With the slicks at 12psi i was happy with the 60's, but i did have a couple people say that it looked like i started to spin about 400 feet out...
I didnt have the time to play more with the pressure but i think this friday i will start with 12 and drop a pound or two and see how the car likes it, I would have thought that if the slicks are launching well then they shouldnt be spinning at any point in second gear.. I added some billet LCA's over the winter to help it bite, but other than that the best my car has gone in the 1320 is 114mph. It was to dam hot last week and all i could get running pic rich was 109....What pressure do you guys run in your slicks? If a slick bites well off the line it shouldnt spin down the track should it?
I didnt have the time to play more with the pressure but i think this friday i will start with 12 and drop a pound or two and see how the car likes it, I would have thought that if the slicks are launching well then they shouldnt be spinning at any point in second gear.. I added some billet LCA's over the winter to help it bite, but other than that the best my car has gone in the 1320 is 114mph. It was to dam hot last week and all i could get running pic rich was 109....What pressure do you guys run in your slicks? If a slick bites well off the line it shouldnt spin down the track should it?