Just curious if the Extender chip, or the one i have which is the one right before the latest they came out with, has a rev limiter built in to it to cut out the motor at a certain RPM. I noticed something today for the first time while blasting (or trying to blast through 1st gear) the motor cut out when i opened her up, trying to look at my tack gauge, but the 1st gear shift revs really!!!! fast and couldnt see what my monster tach reading was when the shift lite was set at 5300rpms, before slamming into 2nd. But the motor cut out before i had the chance to actually get it into second. I thought real quick that maybe my gears popped out of place by themselves when this first happened, but it seems like more of a motor cut out than anything. I drove it around a bit and played around some more just to make sure it wasnt my tranny acting funny. All gears popped into place fine when i just put her into drive and starting going. I usually start off in second to get more RPMs out of here because i noticed shell shift at right around 5000rpms if i let her do it herself, but i like to manually bring her up to around 5200-5300rpms myself, (seems to get more pull to me dunno though) please let me know what you guy think of this and if some of these chips do have rev limiters and motor cut out at a certain rpm. I am running the the Extender chip from ramcharges, but never looked into this that deep to even ask if it has a limiter burned into it, but im sure it does, just double checking with you guy.
thanks
jojo
thanks
jojo