Regal Doors, 2 3/4" exhaust

LSTTYPE

Active Member
Joined
Dec 31, 2001
These are some rust free doors I picked up from a friend. I thought my cousin needed them for his car. It turns out the body shop said the stock doors on my cousins car could be salvaged so now I have these just sitting. I am asking 200$ each. One has a window. There is a little surface rust that is visable from the pics but it WILL sand right off. Hope the pics are descent.
 

Attachments

  • DSCN1977.jpg
    DSCN1977.jpg
    79.9 KB · Views: 566
  • DSCN1978.jpg
    DSCN1978.jpg
    66.3 KB · Views: 564
  • DSCN1983.jpg
    DSCN1983.jpg
    72.7 KB · Views: 564
  • DSCN1979.jpg
    DSCN1979.jpg
    88.5 KB · Views: 563
2 and 3/4 dual exhaust

I bought this exhaust system from Mike Licht probably 5 or 6 years ago at BG nats. It is Not stainless but the mufflers are. It sounds good and is fairly quiet.Comes with all clamps etc. It has some grease and oil on it that can be seen in the pics that I can clean off if it bothers you. Im putting my ATR single shot back on. 250$ obo can ship.
 

Attachments

  • DSCN1985.jpg
    DSCN1985.jpg
    47.7 KB · Views: 571
  • DSCN1986.jpg
    DSCN1986.jpg
    36.5 KB · Views: 572
  • DSCN1987.jpg
    DSCN1987.jpg
    26.5 KB · Views: 564
  • DSCN1988.jpg
    DSCN1988.jpg
    34.2 KB · Views: 574
No its pretty quiet, I just got it off my car and ran into "problems" Tiny rust holes in the bottem of it. Will post pics
 
for what year do the doors fit? and if TE don't take the exhaust will it fit a 83 t-type
 
hey LS somebody told me the body line on the 82 83 where different than the later ones 84-87
 
regal doors

I will offer 100.00 for drivers side door if all hardware, fittings, weather stripping etc. in other words complete. ( power lock or manual?) Verify shipping costs should be about 50.00 Please reply at your convenience.
 
WHat's rusted on the exhaust? The pipes or mufflers ? How bad & where
I'M still waiting for the picture's

ED
 
Sorry Ive been away from my pc for a few days. Let me make this clear... I will fix the issues with the exhaust and I will provide after pics. I did not realize the issues until I just took it off and saw them. Sorry but I will not go below 150$ each on these doors. These doors are hard to find.
 

Attachments

  • DSCN1992.jpg
    DSCN1992.jpg
    48.1 KB · Views: 337
  • DSCN1993.jpg
    DSCN1993.jpg
    56.9 KB · Views: 334
  • DSCN1994.jpg
    DSCN1994.jpg
    50.3 KB · Views: 336
  • DSCN1995.jpg
    DSCN1995.jpg
    38.3 KB · Views: 339
  • DSCN1996.jpg
    DSCN1996.jpg
    62.7 KB · Views: 341
On one of those pics, next to my stainless mufflers is an old rusted pipe and muffler off my work truck, sorry for confusion.
 
Heres more pics of the doors. I can wire brush the bottem of them if someone wants me to.
 

Attachments

  • DSCN1998.jpg
    DSCN1998.jpg
    77.1 KB · Views: 335
  • DSCN1999.jpg
    DSCN1999.jpg
    48.4 KB · Views: 333
  • DSCN2000.jpg
    DSCN2000.jpg
    73.7 KB · Views: 331
  • DSCN1997.jpg
    DSCN1997.jpg
    67 KB · Views: 329
Top