Race Star Dark Star Wheels

Raymond Bunch

"Turbo Enthusiast"
Joined
Mar 20, 2002
These wheels look great on pretty much any GM car! In summary...

I purchased the wheels NEW from Summit Racing. Upon receiving them I noticed they would not fit the bolt pattern of my 2013 Mustang 5.0 which is 4.5 in bolt pattern.

Here's a chance to save a bundle, more than half off the original price of $308.76 each from Summit racing.

Specs: 17 in x 4.5 in, 5 x 4.75 bolt circle , 1.75 in BS. See site below for more information.

http://www.summitracing.com/search?...SortOrder=Ascending&keyword=Race-92-745242dsd

$300

http://sandiego.craigslist.org/csd/pts/4976111141.html

Ray
 
They look very good on Buick.
image.jpg
 
Surprisingly the 15X10 rears are cheaper than the front if you go the staggered route. I've seen a few guys run this set up at Fontana Drags.

I run the same set up on my Mustang. 15X10 rears with 325/50/15 MT Drag Radials.
 
They are for GM. You might want to do some research first. But the offset and bolt pattern should be good.
 
A 15X10 withe 4.5 BS will work with 275-60-15 MT Drag Radials "IF" the car isn't lowered and the rear is centered. This is a very common setup with our cars. I ran this on combo on almost every GN's, TType, and Turbo T's, that I've owned over the years. It just depends on what you want. 15X8 with 3.5 BS will also work well.
 
I've been receiving a lot of text/messages asking if I would ship these. Sorry but no. I would like to sell local just in case there is a fitment issue or something. I don't think there will be, but I just don't have time sending and receiving packages if there was an issue. Thanks.
 
Last edited:
Top