wheels ,tires and some more

gczarny

fast is cool !
Joined
Nov 13, 2005
I started spring cleaning and have some Buick parts that I don't need ,maybe somebody will find use for them so here we go ;


Have a set of 4 very light weight Pro Star drag racing Cragar/Weld wheels 5X4.75 bolt pattern , 15X8 fronts with 4 " backspacing and 15X9 rears with 4.5 " backspacing ,BF T/A 275/60/15 mounted on rear wheels are like new and have about 500 mls street driving on them ,the fronts are BF G-Force Sport 225/60/15 and they are very low so I am not asking any money for them ,may take them off to save shipping charges ,asking $500 ,prefer local pick up as shipping may get pricey ,Located in Sarasota Florida 34243 . Also have two MT ET Street Radial 275/60/15 that are about 40 -50% good for $200 if local pick up .

I also have two brand new MT Street Comp tires 235/40/18... $340 for two .

I have coil pack with high end wires $50

Two fuel line feed fuel rail $65

" Tornado" intake insert ,for those that have nasty turbo surge this fixes it $ 30

OEM exhaust headers $ 60

Flowmaster straight through muffler modified to go in place of cat. converter , it will give you better sound then straight pipe without any performance loss $50

Email me at gczarny@hotmail.com .



Thanks .
 

Attachments

  • IMG_0826.jpg
    IMG_0826.jpg
    405.5 KB · Views: 190
  • IMG_0828.jpg
    IMG_0828.jpg
    505.5 KB · Views: 169
  • IMG_0829.jpg
    IMG_0829.jpg
    398.3 KB · Views: 172
  • IMG_0870.jpg
    IMG_0870.jpg
    452.2 KB · Views: 165
  • IMG_0871.jpg
    IMG_0871.jpg
    475 KB · Views: 169
  • IMG_0874.jpg
    IMG_0874.jpg
    380.5 KB · Views: 170
  • IMG_0876.jpg
    IMG_0876.jpg
    461.3 KB · Views: 169
  • IMG_0879.jpg
    IMG_0879.jpg
    685.3 KB · Views: 171
  • IMG_0882.jpg
    IMG_0882.jpg
    462.3 KB · Views: 169
  • IMG_0886.jpg
    IMG_0886.jpg
    394.6 KB · Views: 181
Interested in the headers do you have a picture of the flange side that bolts to the heads.


Sent from my iPhone using Tapatalk
 
Interested in the headers do you have a picture of the flange side that bolts to the heads.


Sent from my iPhone using Tapatalk
I had RJC Head Clamps installed so some grinding was required to get needed clearance .
 

Attachments

  • IMG_0890.jpg
    IMG_0890.jpg
    480.6 KB · Views: 60
  • IMG_0891.jpg
    IMG_0891.jpg
    462 KB · Views: 54
  • IMG_0893.jpg
    IMG_0893.jpg
    483.5 KB · Views: 52
I'll pass too chopped up for my liking.


Sent from my iPhone using Tapatalk
 
did not get it , please resend.
Sent it :)

And if the message still doesn't go through, please send me one. I can be there in person in June to pick up the wheels and am interested int them. If you would rather call me, my number is 2 zero one 9 5 three five 9 8 two
 
Last edited:
Top