Put in Lucas Redstripes and now...2 codes

[TurBo BiRd]

I put in lucas 40# injectors w/ a chip I got in the package and now she's throwing 2 codes and idles around 2000-2400 in park and 1000 in gear .The codes are 3 short blinks and then one long and the other is 5 short blinks and then 1 long. Is that 13 and 15?


Thanks, Bobby.

 

[AsphaltAnihil8r]

Originally posted by TurBo BiRd
I put in lucas 40# injectors w/ a chip I got in the package and now she's throwing 2 codes and idles around 2000-2400 in park and 1000 in gear .The codes are 3 short blinks and then one long and the other is 5 short blinks and then 1 long. Is that 13 and 15?


Thanks, Bobby.

I see you got the injectors,,,Make sure the chip is seated properly and that none of the tabs in the chip are bent from installing the chip,
Then check the wiring for the injectors make sure they are on the correct injector..
then maybe a fuel problem or line off some where..

you did something screwy,,the injectors are perfect and ran great in my T


Good luck
Dennis

 

[Geoff87]

Try re-setting the ECM

The orange wire by the battery. Disconnect, then re-connect after ten seconds or so.

 

[AsphaltAnihil8r]

well