Parts have to go. I lost my shop!

[charlief1]

Well I opened the shop up six months ago and my land lord has decided to raise the rent so I can stay in it. Needless to say I have a bunch of parts that have to be moved in a very short time. This is not by choice and rather than watch it end up in the scrap I'd rather let someone else get what they need. I'm not happy about it but just about everything is for HA cars. If you need something And you see it PM me or email me. I have a bunch of parts that need new homes and someone that can use them. You shuld be able to PM me but if you can't leave me a note here please.

If you see something you like or need make me an offer, I'm not in a position to refuse any decent offers. If I put a price on it then it's what I've got in it. Shipping is extra unless we agree otherwise. Thanks.

Here are the pics so see if you need something.:smile:

 

[charlief1]

More parts.

 

[charlief1]

More. If you look at the headers there are 2 sets and one is ported but both sets need some work on them.

 

[charlief1]

And yet more. The 4.1 block has been vated and magnifluxed in addition to partially prepped/deburred in the valey and will need align bore done as well as bores done. It spun a main and I just wouldn't trust it other wise. I've got $300 in it right now. Shipping will be extra on it unless you want to come pick it up.

 

[charlief1]

Wheels. These are Vectors and there are 5 of them. 8.5" and one 7". All 5 or buy 3 and 2. I don't have room for a single extra and I can't use them since I converted to rear discs. I paid $350 for all of them plus shipping. Same for you I hope.

 

[charlief1]

NA intakes. These are hard to find and one is a 4.1 that I ported so others could see how to do it. I can't let any of them go for less than $150 plus shipping. I have a ton of time in the 4.1 intake so keep that in mind.

 

[charlief1]

Old style slot mags as well. 4 of them. 2 8.5" and 2 7.25" wide. Back spacing like the Vectors. 3.625" (3 & 5/8").

 

[michael l vogel]

Are the plug wires original GM wires? Looking for a set ov originals for a 1987 GN. If original interested. Let me know how much. Mike

 

[RIFF RAFF]

sorry to hear all this charlie .. i would of charged the guy three times that .. he really has no clue .. ill being praying for you & yours .. bump for a good seller !!!

 

[charlief1]

Are the plug wires original GM wires? Looking for a set ov originals for a 1987 GN. If original interested. Let me know how much. Mike

These are HA parts Mike. I don't think they'd fit an IC car but I'll look at them and make sure who made them. I believe Kirbans sells a set of wires that look stock so you might want to check Dennis' site.

sorry to hear all this charlie .. i would of charged the guy three times that .. he really has no clue .. ill being praying for you & yours .. bump for a good seller !!!

Thanks is all I can say right now.

 

[Jobi-Wan]

Sorry to hear about your shop Charlie. Wish I wasn't broke at the moment or I'd take an intake off your hands.

 

[Johngregston26]

Well sir u may knkw something then...i have an 85 gn that I just got it running and this car runs super rich...and doesnt like boost either...when it starts to spool it slows down almost...have to drive it like miss daisy till we can figure it out

 

[williambavila]

charlie do you have any drivers side headers for a 87 gn?

 

[charlief1]

Sorry to hear about your shop Charlie. Wish I wasn't broke at the moment or I'd take an intake off your hands.

I've got a stripped one I haven't posted yet so if you want it how's $25 plus shipping and PP fees sound?

charlie do you have any drivers side headers for a 87 gn?

I may be wrong but I think the drivers side are all the same William. I still owe you and I know I've got 1 DS header that doesn't have cracks in it. I'll check my cash and send it if you want.:smile:

 

[charlief1]

Well sir u may knkw something then...i have an 85 gn that I just got it running and this car runs super rich...and doesnt like boost either...when it starts to spool it slows down almost...have to drive it like miss daisy till we can figure it out

Where ya at John? Do you have some sort of scanner you can provide info from the car with? That's one of the most valuable tools you can have to help you figure out any issues.

 

[williambavila]

I will gladly pay you for shipping. I would appreciate the header if you have it. If you want to send more my way I will gladly take all you can send. let me know about shipping I will paypal you the money. I hope all is well.

 

[Pittsburghkid]

It's a shame to hear all this is happening to you. I'd gladly hold all these parts for you until you can get a new space but the shipping would probably be outrageous. There's gotta be someone in your area willing to put these parts in the corner of a garage until you can get something else worked out. good luck with everything

 

[Jerryl]

Sorry to hear Charlie. :redface:
You have another 3" test pipe with cutout?

 

[charlief1]

I'll see about packing the header up and sending it your way William. I'll deal with the cost of the shipping after I send it. Thanks.

Thanks Kid but I need to lighten the load some so I can make myself a little more moble right now. I'm looking at moving out of the area and don't want to have parts left behind if I don't have to.

Lorry Jerryl. You got the only one I had.

 

[Jobi-Wan]

I've got a stripped one I haven't posted yet so if you want it how's $25 plus shipping and PP fees sound?

That's a great offer, but I can't spend anything at the moment unfortunately. I'm pretty much frozen for the next year or at least until I get a significant chunk payed on a recent expense. Where are you thinking about moving to?