New m/t radials

RYAN GRAVES

Member
Joined
Mar 16, 2006
Are the P295/55/R15 legal for TSM? Cross section width 12.0 tread 10.8

I am pretty sure they are just want a verification.
 
It is a 28x12.50 that is a direct replacment for a 28x10.5 slick. I have seen the tred listed as 10.0 10.8 10.9 So who knows what it really is. I see no advantage over the big hoosier drag radial that is legal so i say it is all good. What does everyone else think. Walt
 
-Rear drag slicks w/sidewall designation up to and including 29.5” x 10.5” - 15”. No "W" tires allowed. Rear DOT street tires w/sidewall designation up to and including a 29.5” x 12.5” - 15” size tires are allowed. Rear tire footprint when installed on a rim and mounted on the car can not exceed a maximum of 10.6" in width at 10 psig checking pressure. Tires may not be shaved at the tread edge to meet the 10.6" maximum tread width rule.



Hoosier Drag Radial
17316 P295/65R15 E 10.0" 29.6" 93.0" 8-10" 8.5" 12.0" 27

Mickey Thompson
3755R P295/55R15 28 X 12.50R15 35 R2 8.0-10.5 9.5 12.0 10.9 27.8 87
 
Well I guess that sums it up. Was going to order them today but it looks like
I will stick it out with the 275's.
 
Hoosier Drag Radial
17316 P295/65R15 E 10.0" 29.6" 93.0" 8-10" 8.5" 12.0" 27

So this one's not legal either? 29.6 is too tall. I just checked summits site & they lisy it as 29.5
 
So this one's not legal either? 29.6 is too tall. I just checked summits site & they lisy it as 29.5

A 29.5" M/T slick is legal. It's actually 29.9" tall.

3062S 29.5/10.5-15S 27 M5 9555 10 13.2 10.2 29.9 94

Unfortunately, the tire rule has not been updated since before in introduction of the new drag radials. So the Hoosier is shorter than at 29.5" slick and less than 10.6" wide measured and is legal.
 
Top