New and not so new assorted Items

[Racetronix]

Fuel rail feed fittings:
-6 X 16mm X 1.5 Male O-Ring, F.I.

or
-8 X 16mm X 1.5 Male O-Ring, FI

Fuel rail return fitting:
-6 X 14mm X 1.5 Male O-Ring, F.I., BLK


Frame rail fittings:
Feed:



6 X 16mm X 1.5 Female, “O” Ring Seal



or
-8 X 16mm X 1.5 Female, “O” Ring Seal


Return:
-6 X 14mm X 1.5 Female, “O” Ring Seal




or
-8 X 14mm X 1.5 Female, “O” Ring Seal

 

[Pronto]

Any updates on the fuel lines?

 

[cwmccray]

I have a 85 T Type that runs out of gas at 4 gallons. I hope this will solve my issue and what is the current price? Will this unit work with E85 pumps and 340L pumps...

Racetronix Digital Dash Level Senders

FEATURES:

• New-technology ceramic 120-ohm level sensor resistor
• Compatible with G-Body Turbo Regals with digital dash cluster
• 78mm (3.0") inner diameter, 94mm (3.7") outer diameter.

For use with Racetronix FPS-G7 series fuel pump senders ONLY!

 

[Racetronix]

I have a 85 T Type that runs out of gas at 4 gallons. I hope this will solve my issue and what is the current price? Will this unit work with E85 pumps and 340L pumps...

Please click on link for web store price.
Level sender has nothing to do with the brand/spec of pump used.
E85 compatible

THIS IS ONLY COMPATIBLE WITH OUR FPS-G7 SENDERS!!!
We can not gaurntee compatibilty with any other brand of sender. This is a non-returnable item.

 

[Racetronix]

FPS-G7W416EAN - G7 Stainless Fuel Pump Sender w/Walbro E-85 416LPH AN Fitting

Please view this thread for more info and questions:

http://www.turbobuick.com/forums/threads/new-racetronix-416lph-e-85-pump-ss-sender-combo.386869/

 

[Racetronix]

New USA-Made Thermoid Silicone Hoses
http://www.racetronix.biz/index.asp?FSCat=59&url=IND&iFromFeatured=1

 

[Racetronix]

Racetronix Turbine-Tech RXP340M - 340L/Hr High Pressure / Volume In-tank Fuel Pump

• Flows 340 Liter/Hr (90 US GPH) @ 43 PSI @ 13.5V *
• In-tank use only / submersible design
• Reliable and quiet turbine impeller
• Can be used with EFI or carbureted applications
• May be used in pulse modulated systems (PWM)
• Center-inlet design. Same fitment as Walbro GSS340M, GSS307M and GSS294M pumps.
• Each pump individually tested
• For gasoline (use with E85 will reduce life expectancy)
• Integral check-valve
• Over-pressure safety bypass valve

 

[Racetronix]

NEW DESIGN 160 LB/HR LOW-IMPEDANCE INJECTORS

These new low-z fuel injectors are the perfect step between our 120 and 220# models.
Unlike the old Bosch 160# LPG injectors which were not a true low-z injector, these are.
The 2-ohm coil allows for full peak current and maximum field saturation using P/H drivers.
Faster and much more linear than the old models even at elevated pressures.
Going E-85? No problem! These are 100% E-85 compatible and sport stainless bodies and Viton o-rings.
http://www.racetronix.biz/itemdesc.asp?ic=01D164x&eq=&Tp=


Limited introductory pricing and supply.

 

[Racetronix]

NEW HBD THERMOID VAPOR-LOC FUEL INJECTOR HOSE
Perfect for replacing hanger to fuel line hoses on TRs

• APPROVED by CARB (California Air Resources Board).
• THE BEST FUEL SAVING/MOST ENVIRONMENTALLY EFFECTIVE FUEL LINE HOSES AVAILABLE.
• TRAPS/PREVENTS UP TO 99% OF ALL FUEL VAPORS FROM PERMEATING THROUGH THE HOSE -SEE HOSE COMPARISION CHART BELOW.
• VAPOR-LOC J30R9 MEETS/EXCEEDS ALL SAE J30R9 FUEL INJECTION HOSE SPECIFICATIONS.
• DESIGNED TO CARRY FUEL IN CARS, TRUCKS, MOTORCYCLES, LAWN AND GARDEN EQUIPMENT, GASOLINE OPERATED GENERATORS, AND OTHER GASOLINE/BIO - FUEL ENGINES.
• RESISTS GASOLINE/ETHANOL BLENDS, OILS, CAUSTIC EFFECTS OF BIO-FUELS, COVER ABRASION AND OZONE
• ARE AVAILABLE IN VARIETY OF SIZES TO FIT MOST APPLICATIONS.

Available in 1/4", 5/16" and 3/8" ID.
1/4" http://www.racetronix.biz/itemdesc.asp?ic=FFHR-VLR9-1/4&eq=&Tp=
5/16" http://www.racetronix.biz/itemdesc.asp?ic=FFHR-VLR9-5/16&eq=&Tp=
3/8" http://www.racetronix.biz/itemdesc.asp?ic=FFHR-VLR9-3/8&eq=&Tp=


Use with our smooth band worm drive german-style hose clamps:
http://www.racetronix.biz/itemdesc.asp?ic=GCLMPSS-16&eq=&Tp=

 

[Racetronix]

For those who have a fairly stock car but need a quality replacement...

FPS-G7W180 - G7 Stainless Fuel Pump Sender w/ 180LPH Pump

FEATURES:

• Fully assembled and tested
• All stainless-steel construction
• New-style 90 ohm ceramic level sender resistor
• Non-tapered pump outlet tube for maximum flow / performance.
• Tubes have smoother radius bends for maximum flow / performance (1)
• Dual 14-gauge circuits (vs. factory single 16-gauge ) for improved power handling and reliability (2)
• Modular wiring harness allows for various wiring configurations / upgrades and simple repairs
• Includes a new stainless-steel locking ring, OE-type tank gasket, rubber hose, hose clamps sound dampening pump sleeve
• Walbro 180LPH pump pre-installed
• 30-micron graded-media filter sock installed

(1) A pulsator / dampener is not used.
(2) The Tyco in-tank connector fits Walbro and many other aftermarket replacement pumps. Please check polarity markings before installation and make adjustments as required. This Tyco connector will not fit the factory-style pumps with Delphi Metri-Pack 150-series connectors. The maximum recommended electrical load is 20 amps continuous and 28 amps intermittent duty. This high current capacity allows this sender to be used with all factory and high-performance in-tank pumps currently available. It is recommended that a Racetronix FPWH-006 fuel pump wiring harness be used with this sender in order to properly support the power demands of the Walbro high-performance fuel pump.
Similar to Delphi FL0207, Spectra Premium FG156A

(3) May fit other G-Body cars with or without modification when being adapted to FI applications. NOT SUPPORTED BY RACETRONIX.

 

[Racetronix]

680LPH Dual Pump Assembly*(not for use in/with factory Turbo Buick tanks/senders)

For customers who need enough fuel to support upwards of 1400HP, Racetronix introduces this 680LPH dual in-tank fuel pump assembly. Two Racetronix RXP340M 340LPH pumps are coupled using our billet dual-pump coupler and stainless mounting bracket. The outlet uses 3/8" hose barb that can accommodate both rubber and plastic fuel lines. The billet coupler is fitted with Viton o-rings for a reliable push-fit seal. All components in this assembly slip together for simple assembly/disassembly. No clamps are required.

ASSEMBLY:

• 2 x Racetronix RXP340M Turbine-Tech pumps
• 1 x Racetronix billet pump coupler with Viton o-rings
• 1 x 3/8" machined hose barb (custom for coupler)
• 1 x Stainless pump mounting bracket
• 2 x Filter socks (30-micron)
• 2 x 12" Teflon electrical harness w/pump connectors

We highly recommend using one of our fuel tubes (not rubber hose) with Oetiker clamps to connect this assembly to your sender. 8mm fuel tubes will require thermal expansion to fit over the 3/8" hose barb as well as most sender inlets. Typical Oetiker clamp sizes used are 12.3 (std) and 13.3mm (expanded).

 

[Racetronix]

Fuel line kits are now available. The first batch are being made to order so please allow 2-3 business days to ship.
There are three options so please read the item features list in each link for a comparison.
We may consider adding the Kevlar/Teflon kit but it will be very expensive given the cost of the components.

Thanks!

FLK-G7A - TR Fuel Line + Filter Kit, SS Teflon
http://www.racetronix.biz/itemdesc.asp?ic=FLK-G7A&eq=&Tp=

FLK-G7B - TR Fuel Line + Filter Kit, SS Teflon Black
http://www.racetronix.biz/itemdesc.asp?ic=FLK-G7B&eq=&Tp=

FLK-G7B1 - TR Fuel Line + Filter Kit, SS Teflon Black RS Fittings
http://www.racetronix.biz/itemdesc.asp?ic=FLK-G7B1&eq=&Tp=

 

[Racetronix]

Shipping starting 9/13/13:

FPS-G7RXP340M - G7 Stainless Fuel Pump Sender w/ 340LPH Pump AN Fitting

FEATURES:

• Fully assembled and tested
• All stainless-steel construction
• New-style 90 ohm ceramic level sender resistor
• Non-tapered pump outlet tube for maximum flow / performance.
• Tubes have smoother radius bends for maximum flow / performance (1)
• Dual 14-gauge circuits (vs. factory single 16-gauge ) for improved power handling and reliability (2)
• Modular wiring harness allows for various wiring configurations / upgrades and simple repairs
• Includes a new stainless-steel locking ring, OE-type tank gasket, rubber hose, hose clamps sound dampening pump sleeve
• Racetronix 340LPH high-pressure/volume pump pre-installed
• 30-micron graded-media filter sock installed
• Fitted with male -8 AN outlet and -6 AN return fittings

 

[Racetronix]

​

Black Friday Savings​

Save 5-30% on almost every item category in our web store​

​

Nov. 29th to Dec. 2nd, 2013*​

​

Sale items include fuel injectors, fuel pumps/systems,​

wiring harnesses, hardware, tools, fittings, hoses and more.​

​