need help car poping and will not run

[Toby_Goodmk]

Cam sensor is 180* out somehow.

 

[Night_train01]

Had the same thing happen to me last year, there is a little pin that holds the top of the cam sensor together, the pin on mine broke and the cap rotated. Remove the plastic cover and you will see the cap and pin.

 

[wb_7354]

Is your fuel gauge accurate? It sounds to me like it's out of gas [emoji618]️


Sent from my iPhone using Tapatalk

 

[Heskahoka]

I'll throw the OP a bone:

No Start tree:
http://www.vortexbuicks-etc.com/no_start_tree.htm

 

[achalmersman]

I'll throw the OP a bone:

No Start tree:
http://www.vortexbuicks-etc.com/no_start_tree.htm

That bone was thrown 2 weeks ago and no results have been posted. Just guesses and wasted money

No trees were harmed in the sending of this message, however, a significant number of electrons were terribly inconvenienced.

 

[Heskahoka]

That bone was thrown 2 weeks ago and no results have been posted. Just guesses and wasted money

Umm...yep you are right, I missed your post of the exact same thing.

That will teach me to read the thread from the beginning.

 

[Sir. Ansalot]

well guys i found my problem i went back to the cam sensor pulled the cap off cap tabs were good so i look at the
steel wheel the tab that holds it in place was gone i removed the screw turned the wheel back to where the tab broke put
the cap back on and it fired right up and ran fine no backfire. so i will be buying a new cam sensor all most 300$$ wow
thanks for all the help guys

 

[Gene Van Horn]

You can send it out and get it fixed for 89.00

 

[Sir. Ansalot]

where do you send it send a link please

 

[Gene Van Horn]

Scott, at GNS preformance. He is vender here on the site. Look up his site and you will see the cam sensors.

 

[zapp240]

easy to search for it, but this is one link, 1st one that came up.

http://www.gnsperformance.com/cam-sensor-rebuild

 

[Gene Van Horn]

There you go, easy peasy.

 

[captrob]

http://rjcracing.com/product/cam-sensor-repair-kit/

Then after Scott at GNS does his magic, put the RJC tab on it and it will be bullet proof for a long time.


Sent from my iPhone using Tapatalk

 

[Sir. Ansalot]

ok guys thanks for the info will do

 

[Sir. Ansalot]

thanks for the link will be ordering a kit frist thind in the morning to fix it only 22dollars way better than almost 300 once again thanks guys

 

[earlbrown]

Or so it yourself and save a bunch of money and time...

http://rjcracing.com/product/cam-sensor-repair-kit/