Moog 5658/5413 results. Not what I expected.

[im4darush]

Just put these in and took the car out for about 15 minutes on a road where there are many uneven areas to seat the springs. Fronts are at 27", rears are 27.5". I measured from the floor to the fender molding. Front springs are in right...(one hole covered, and one showing on the A-Arm. Tops are also in the seat). Rears are rears...they are in the seat with no isoloator on the bottom perch. The top one is still there. I dont really think it matters which way the pigtail is facing on the rears but I have them both pointed towards the tires.

I know some folks are saying these will settle some, but 27" and 27.5" to start with?? Seems high to me.

 

[~JM~]

I installed 2.5" lift springs on my Jeep. Initially raised the Jeep about 5+" until the springs settled.

Excercise those springs & let them settle.

~JM~

 

[buttonfly]

I used the moogs, with tall lower ball joints...........let them settle a bit. Im at 25.75 up front, and 27.25 in the rear. if it let the air out of the bags it sits around 27.

 

[im4darush]

You guys were right. Front is down to 26.5", rear is at 27"

 

[buttonfly]

good to hear..........just takes some driving and a couple of days! lol