The bolts are frozen the the sleeves in the bushings and won't budge. I'm afraid the sleeve is going to start spinning in the bushing's rubber and I'll be screwed. How do I get that sucker out?
You can't get a hammer to it unless you pull the backing plate off on the rear and it looks like the front is going to need the exhaust dropped.
Any tips? The arms CAN be destroyed in the process if needed.
PS, my torch is a little Sears MAPP/Oxy unit so I can't cut, red hot-yes, cut - no.
You can't get a hammer to it unless you pull the backing plate off on the rear and it looks like the front is going to need the exhaust dropped.
Any tips? The arms CAN be destroyed in the process if needed.
PS, my torch is a little Sears MAPP/Oxy unit so I can't cut, red hot-yes, cut - no.