All parts are located in Sweden and shipping is included to an eastcost port. Parting it out would be devastating because of shipping outside Sweden, so please no PM´s regarding single parts. Got plenty of pictures at http://gallery.stb-racing.com
Blocks:
* Stage 2 block, #153
* Stage 2 block, #153 (was holed, repaired and welded but needs one sleeve)
Heads:
* One set of 199592 aluminum heads, bare. (welded, needs machining)
* One set of aluminum heads, complete. Ported by Jim Bell at East Texas Race Cars (2.125 intakes, 1.625 exhausts, flow 325/285 CFM, titanium valves, retainers, Erson E9150048P electroplated triple springs, Jesel 1.7 rocker set-up with tool steel adjusters)
Cranks, balancer, flexplate:
* BMS evenfire crank, machined for CSB rods (needs #1 journal turned).
* BMS evenfire crank
* ATI superdamper
* unknown damper
* JW flexplate, SFI approved
Camshafts, lifters, pushrods, rockers & springs:
* Comp evenfire roller cam, .460 lobe lift
* LSM oddfire big journal roller cam
* 12 Comp roller lifters
* 10 Isky roller lifters
* 6 unknown roller lifters
* 6 unknown roller rockers, stamped 1.55
* 6 unknown roller rockers, stamped 1.6
* 6 unknown roller rockers
* complete revkit
* BUNCH of pushrods
* LOADS of springs
Intakes:
* Ultra trick sheet metal intake manifold by Jim Bell (2 tops, one for 4150 Holley the other for a Dominator)
* BMS intake manifold silver powdercoated
* BMS intake manifold
* Wilson Manifolds 105mm throttlebody and neck (unused)
Valvecovers:
* 1 pair BMS cast aluminum valve covers, silver powdercoated
* 1 pair Moroso sheet metal valve covers
* 1 pair BMS cast aluminum valve covers
Oilpumps:
* One 1-stage Weaver Brothers external
* One 3-stage Weaver Brothers external
* LOTS of Weaver Brothers spares
* Weaver Brothers repair manual
Oilpans:
* 4 different including one "high dollar" Stefs pan and another sheet metal pan
Timingcover and waterpump:
* BMS aluminum timing cover
* Unknown timing cover
* Meziere electric waterpump, UNUSED
* Stock type mechanical waterpump
Pistons and rods:
* 5 MGP aluminum rods 6.230 long
* 6 unknown rods (could be Carillo). One is cracked
* 6 CP 4013R pistons
* 3 BME 66 pistons
* 7 unknown pistons
Misc:
* 4 different MSD distributors (one #8552, one labled "Buick V6 EVEN-FIRE", one #?475)
* BHJ honing plate
* header adapter plates
* Milodon gear drive
* Bunch of gaskets
* A couple of drive belts
I´m hoping to get atleast $5500.
Blocks:
* Stage 2 block, #153
* Stage 2 block, #153 (was holed, repaired and welded but needs one sleeve)
Heads:
* One set of 199592 aluminum heads, bare. (welded, needs machining)
* One set of aluminum heads, complete. Ported by Jim Bell at East Texas Race Cars (2.125 intakes, 1.625 exhausts, flow 325/285 CFM, titanium valves, retainers, Erson E9150048P electroplated triple springs, Jesel 1.7 rocker set-up with tool steel adjusters)
Cranks, balancer, flexplate:
* BMS evenfire crank, machined for CSB rods (needs #1 journal turned).
* BMS evenfire crank
* ATI superdamper
* unknown damper
* JW flexplate, SFI approved
Camshafts, lifters, pushrods, rockers & springs:
* Comp evenfire roller cam, .460 lobe lift
* LSM oddfire big journal roller cam
* 12 Comp roller lifters
* 10 Isky roller lifters
* 6 unknown roller lifters
* 6 unknown roller rockers, stamped 1.55
* 6 unknown roller rockers, stamped 1.6
* 6 unknown roller rockers
* complete revkit
* BUNCH of pushrods
* LOADS of springs
Intakes:
* Ultra trick sheet metal intake manifold by Jim Bell (2 tops, one for 4150 Holley the other for a Dominator)
* BMS intake manifold silver powdercoated
* BMS intake manifold
* Wilson Manifolds 105mm throttlebody and neck (unused)
Valvecovers:
* 1 pair BMS cast aluminum valve covers, silver powdercoated
* 1 pair Moroso sheet metal valve covers
* 1 pair BMS cast aluminum valve covers
Oilpumps:
* One 1-stage Weaver Brothers external
* One 3-stage Weaver Brothers external
* LOTS of Weaver Brothers spares
* Weaver Brothers repair manual
Oilpans:
* 4 different including one "high dollar" Stefs pan and another sheet metal pan
Timingcover and waterpump:
* BMS aluminum timing cover
* Unknown timing cover
* Meziere electric waterpump, UNUSED
* Stock type mechanical waterpump
Pistons and rods:
* 5 MGP aluminum rods 6.230 long
* 6 unknown rods (could be Carillo). One is cracked
* 6 CP 4013R pistons
* 3 BME 66 pistons
* 7 unknown pistons
Misc:
* 4 different MSD distributors (one #8552, one labled "Buick V6 EVEN-FIRE", one #?475)
* BHJ honing plate
* header adapter plates
* Milodon gear drive
* Bunch of gaskets
* A couple of drive belts
I´m hoping to get atleast $5500.
