Length of lugnut tool with jack

[John Larkin]

I have the stock jack and know how it is mounted. I think I grabbed a stock looking lug wrench at some point but I think it is too long. I found a photo on the net about how the handle mounts to the jack and it looks like it tucks into the jack foot somehow. Can someone post a photo of your stock setup so I can figure out what is going on please? It seems like it needs a sleeve to hold it to the side of the jack. The photo I found is old and grainy.

 

[1986 Buick GX1]

These should help.
The straight end of the lug nut wrench tucks in under the flat part of the foot.
I can measure the length when I get home.

The curved end under the bracket.

 

[John Larkin]

Your pictures helped. I had the jack mounted already and it was too closed for the handle to go under the foot. I removed it and it relaxed enough to slip the handle under the foot, then I mounted the whole assembly back onto the studs, problem solved, thank you. The one I have does not follow the bottom bracket curve exactly but close enough that it holds it securely. Looks OEM to me.