in tank fuel pump for camaro lc2 swap

[turbomaro]

i have a 90 camaro-what would be the best way to go as far as the in-tank fuel pump? i need to upgrade the low pressure pump that is in the car now. would a pump from a camaro with a t.p.i motor work? or could i use a pump that is made for a grand national? any input is appreciated thanks

 

[Quick6'n'-K.C.]

Use the GN fuel pump, i will bolt right in, lots of people using the walboro 340 or the supra pump.

Its the same one for the 1989 turbo trans am.

If you dont mind cutting the car up, http://www.turbobuick.com/forums/tu...how-change-tta-fuel-pump-30-minutes-less.html

If you decide to do it the normal way, the rear axle will need to be dropped, as will the torque arm and shocks.

BW

 

[turbomaro]

thanks i appreciate it.

 

[Quick6'n'-K.C.]

Ive done them the hard way, takes alot of time to get it done, but at the same time you can upgrade the shocks, panhard bar, trans mount for panhard bar.
Fuel pump hotwire kit, fuel filter, and the pump all at the same time :biggrin:


BW