While doing my hot-air build-up, I decided to replace all my sensors. I'm running the '86-'87 ECM, stock chip, and harness. I ordered the TPs from GM Parts Direct using the '86-'87 parts list off the www.gnttype.org-- P/N 25036663. Since it's an '86-'87, and my wiring is also those years, I should be good to go without revrse wiring, right?
I appreciate all of your offers, but after looking at the stock replacement for $136, I did some digging and found that the Holley Projection setup uses a comparable one for $36 through Summit Racing. It's on the way.
V6VEGA -YES!!
MONGOOSE- As I stated earlier Tomco has the exact replacement for less than 30 bucks, but since you already have one on the way no biggie many other people on here have used the holley one also.
V6VEGA -YES!!
MONGOOSE- As I stated earlier Tomco has the exact replacement for less than 30 bucks, but since you already have one on the way no biggie many other people on here have used the holley one also.
boostmaster, i am too in need of a TPS. does Tomco have a website i can purchase it from? if so, could you direct me to it, or to a vendor that sells them? thanks