Tim Cucci
Member
- Joined
- May 24, 2001
Can some give me details on shimming the cam sensor such as where to shim? I know the remove and install procedure I just don't know exactly where to shim.
I have a rattle type noise that goes up and down with rpm. It actualy sounds like lifters but when I take a long screwdriver and use it like a stethascope I get a direct knocking noise from the top of the cam sensor.
This is a rebuilt engine with less than 1500 miles with the stock crank,rods,and pistons reconditioned. Stock cam,lifters,and pushrods reused. Freshened Up.
Thanks
Tim
I have a rattle type noise that goes up and down with rpm. It actualy sounds like lifters but when I take a long screwdriver and use it like a stethascope I get a direct knocking noise from the top of the cam sensor.
This is a rebuilt engine with less than 1500 miles with the stock crank,rods,and pistons reconditioned. Stock cam,lifters,and pushrods reused. Freshened Up.
Thanks
Tim