How to remove oil distick

[natedog910]

What are the steps to removing driver side header... don't want to break anything so am asking all bolts are out 2 from down pipe and the six that hold header in place
Thanks

 

[Bruce Urie]

To remove engine oil dip stick, DO THIS:

Bruce '87 Grand National

 

[GBGN1]

lol yeah like that

 

[TurboDave]

What are the steps to removing driver side header... don't want to break anything so am asking all bolts are out 2 from down pipe and the six that hold header in place
Thanks

The header DOES NOT need to come off to remove the dip stick OR its tube.

 

[turbofabricator]

Remove the 13mm (socket size) nut from the header stud attached to the dip stick tube. Grab the tube, and give it a yank. You will have to rotate it a bit to snake it out. Speaking of snakes.........that is what the revolver is for.
On install, clean the tube with brake clean, the smear a decent layer of Ultra Black silicone or "The Right Stuff" just below where the bead is rolled onto the tube, then reinstall but. Very simple operation.