Help id'ing a Turbo

[asd60303]

Could anyone help with any information on this turbo? There are no markings on it besides A/R .69 which was located behind the turbo cover bracket. The previous owner told me it was a garret 60-1 but I can't exactly remember.

 

[forcefed3.8's]

60-1 compressor, stage 5 turbine.?

 

[dr_frankenstein]

that on center turbine hosing has got to go!

A.j.

 

[asd60303]

that on center turbine hosing has got to go!

A.j.

It is going lol. I bought the car used with a ton of old school technology on there. I would like to find out what exact turbo it is so I can ebay it.

 

[dr_frankenstein]

pull the compressor cover and measure the ind and exd

A.j.

 

[asd60303]

pull the compressor cover and measure the ind and exd

A.j.

I measured 2.285 for the inducer and 2.998 for exducer. Google hasn't helped me out much.

 

[dr_frankenstein]

I measured 2.285 for the inducer and 2.998 for exducer. Google hasn't helped me out much.

looks like a 60 trim TO4E

A.j.

 

[asd60303]

looks like a 60 trim TO4E

A.j.

Thanks for the help, it was appreciated. I was looking on this page after I posted Turbo list: MHI, Gar, HKS - Turbo-Owners.com and found similar measurements.

 

[dr_frankenstein]

Thanks for the help, it was appreciated. I was looking on this page after I posted Turbo list: MHI, Gar, HKS - Turbo-Owners.com and found similar measurements.

no problem.

whats your plans for this unit?

A.j.

 

[asd60303]

no problem.

whats your plans for this unit?

A.j.

I have it on ebay right now, I would like to go with a cpt61 or 66. But with me being in school, money is tight.