GNX wheel scrubbing

[GNX Jerry]

I have Trans Am 16 X 8 GTA (GNX look) wheels on all four points of my GN
( P245/50 VR16 tires all around)

Problem is that the front tires scrub when I turn the steering completely.

What spacing is needed to correct this?

And second, can I still rotate my tires/wheels front to back without

causing problems and re-occurring the dreaded tire scrubbing?

ALL information greatly appreciated!

JERRY

 

[TURBOTWIN2]

Fronts

Only the ones marked "front" will work w/o spacers. You need four fronts to be able to rotate w/o problems. Sell the 2 rears and get 2 more fronts. Only the fronts have the correct zero offset or backspacing. Notice how many times I used the word "front". Not trrying to bust your chops, BTW. Hope this helped.

 

[TLIMITED]

Only the ones marked "front" will work w/o spacers. You need four fronts to be able to rotate w/o problems. Sell the 2 rears and get 2 more fronts. Only the fronts have the correct zero offset or backspacing. Notice how many times I used the word "front". Not trrying to bust your chops, BTW. Hope this helped.

X2