I have a set of 6 MSD 50 lb/hr fuel injectors for sale and several chips for 50 lb/hr injectors. I removed the injectors from my GN about two months ago. I believe one or two of them have a problem but you may be able to get them cleaned and working properly again - not sure. I I used this as an excuse to upgrade to 60 lb. injectors so I don't need these or the chips. I have the following chips that I don't need:
1. James Riddle - 50 lb inj - 93 octane - 20 deg. adv. @ WOT
2. Extender (Full Throttle) "BWL54B0F" - 50 lb inj. - 98 octane - 23 deg. adv. @ WOT
3. Extender (Full Throttle) "BSL77BXE" - 50 lb inj. - 108 octane - 27 deg. adv. @ WOT
4. Turbo Tweak (Eric Marshall) - 50 lb inj. - 93 octane - 20 deg. adv. @ WOT
5. Turbo Tweak (Eric Marshall) - 50 lb inj. - 92 octane - 20 deg. adv. @ WOT
6. Stock original Delco
$50 takes all 6 injectors and $20 takes any one of the chips except the stock chip - the stock chip is free to anyone that want's it.
Thanks,
Rob
1. James Riddle - 50 lb inj - 93 octane - 20 deg. adv. @ WOT
2. Extender (Full Throttle) "BWL54B0F" - 50 lb inj. - 98 octane - 23 deg. adv. @ WOT
3. Extender (Full Throttle) "BSL77BXE" - 50 lb inj. - 108 octane - 27 deg. adv. @ WOT
4. Turbo Tweak (Eric Marshall) - 50 lb inj. - 93 octane - 20 deg. adv. @ WOT
5. Turbo Tweak (Eric Marshall) - 50 lb inj. - 92 octane - 20 deg. adv. @ WOT
6. Stock original Delco
$50 takes all 6 injectors and $20 takes any one of the chips except the stock chip - the stock chip is free to anyone that want's it.
Thanks,
Rob