FP for stock chip

[Hot Air 85]

I know I will need a custom chip but am trying to finsih before I get it burnt. What should I set static FP at with a walbro 340 hot wired and 30LB green stripes...this is with stock ECM & Chip

 

[BRAD_PADGETT]

Every car is different. Mine likes 44 lbs line off. I would start at 43lbs line off. Good luck. Brad

 

[Jerryl]

I belief the stock setting was 37, line off.
With the larger injectors and stock chip (read DC), I would try a bit lower. 35-36.

As Brad stated, every car is different, but for stock chip, 37 is a good baseline. Quick Reference Page For the '86/'87 Turbo Regals and '89 Turbo T/A

 

[Hot Air 85]

thanks

Thanks for the replys guys...I think i'll try 37 to start...just looking for a good starting point to make it start / run when I turn the key...long before I go past 10 psi I will have a custom chip made and set FP accordingly.