tom robison
ALL UP IN THEM GUTZ
- Joined
- Dec 11, 2004
I have decided to sell some parts to help with building of a aluminum stage 2 motor.
I have a 109 shortblock that i built at the beginning of summer and put about 40-50 passes and about 400 street miles. I ran tso this past oct and went 9.27 @ 143 with and have been as fast 146mph with it. Half the passes were 1/8 mile and went the best of 5.89 at 118mph. Here is what ya get.
109 block, rjc girdle, bored, honed, line honed, lifter valley smoothed and decked
3.400 forged 4340 nitrated crank, 5.960 molanar rods, 3.820 9-1 wiseco pistons all zero balanced.
All machine work was done at performance engineering in Hamilton OH and assembled by myself with King main, rod and cam bearings.
The cam is a billet roller by dan at dls, it is a 218/218 hydraulic roller with the TA performance nose hardware and rollmaster timing set.
What is listed is what is included. You will need at zero balanced balancer and flex plate. I am asking 4500.00 plus shipping for this proven piece. SOLD!
I also have these items
Brand new 3.625 stroke 4340 nitrated crank 650.00 shipped
72mm plenum and throttlebbody 325.00 shipped
I also have a stock motor that needs put back together. It has a stock 10/10 crank, stock rods with 20 over pistons, mild cam and lifters and stock heads, balancer and flex plate for 1100.00 plus shipping
I am located in south east Indiana for viewing of parts, I will posted pics later tonight.
I have a 109 shortblock that i built at the beginning of summer and put about 40-50 passes and about 400 street miles. I ran tso this past oct and went 9.27 @ 143 with and have been as fast 146mph with it. Half the passes were 1/8 mile and went the best of 5.89 at 118mph. Here is what ya get.
109 block, rjc girdle, bored, honed, line honed, lifter valley smoothed and decked
3.400 forged 4340 nitrated crank, 5.960 molanar rods, 3.820 9-1 wiseco pistons all zero balanced.
All machine work was done at performance engineering in Hamilton OH and assembled by myself with King main, rod and cam bearings.
The cam is a billet roller by dan at dls, it is a 218/218 hydraulic roller with the TA performance nose hardware and rollmaster timing set.
What is listed is what is included. You will need at zero balanced balancer and flex plate. I am asking 4500.00 plus shipping for this proven piece. SOLD!
I also have these items
Brand new 3.625 stroke 4340 nitrated crank 650.00 shipped
72mm plenum and throttlebbody 325.00 shipped
I also have a stock motor that needs put back together. It has a stock 10/10 crank, stock rods with 20 over pistons, mild cam and lifters and stock heads, balancer and flex plate for 1100.00 plus shipping
I am located in south east Indiana for viewing of parts, I will posted pics later tonight.
Last edited:
