EGR hole in power plate

[richy rich]

Hi there,been away from the GM scene for a while,but Im back
Just recieved my RJC Power plate,was hoping to not drill for the EGR.
Im running an old school "REDS"93 street chip.I know Eric from TT says you can
run his chip with the power plate and NOT drill the hole-but what about
my old school RED chip?So to drill or not to drill
Dont need Emmision testing BTW.
Hey any power benifits to going with a TT chip over my old REDS Chip??
49 turbo,36lb.Dutty Neck,stock converter,stock Downpipe,street car.
Thanks!Rich

 

[just plain john]

If you have a scanmaster you can add/pull fuel with the TT chip to a degree

 

[S10xGN]

I wouldn't drill it. Eric's stuff has the EGR coding written out of it, but even using your old Red's chip, as long as the EGR is connected electrically is all that matters.

 

[84BuickGNYorkPA]

If you have a scanmaster you can add/pull fuel with the TT chip to a degree

+ 1 Fuel and timing adjustable through the chip, just need a scanmaster to adjust the chip settings.

Chuck

 

[richy rich]

Well I never drilled it and all is well.
Thats a neat little plate!