digi dash

Turbo PeppeR

New Member
Joined
Mar 7, 2002
My digital dash is stuck on kilometers ,anyone repair these?
Would not mind going to gauges, is that pretty straight forward conversion?
Not sure which route to go, if I have to pull out dash anyways maybe good time to change...Of coarse there's the cost...:rolleyes:
 
I believe there is a way to switch it back over to MPH by turning the trip odometer knob a certain way for a number of revolutions. Do a search. If not I say keep it and send it in for repair and a 199 mph upgrade at caspers. I always liked the digital dashes.
 
I broke my km/mi knob years ago. So now what I have to do is disconnect the negative battery cable and then re-connect it until I actually get miles again. It seems random. Sometimes it really favors KMH and I have to reconnect it a dozen times before I get MPH again.
 
As previously posted just twist the Trip-Odometer reset knob and you can toggle from KM to MPH. I do not remember having to turn mine several times..just a small twist worked. (Forget to which side but you only have two choices)
 
If the reset knob even turns several times, it's broken. The switch is a flimsy plastic part that breaks easily if torqued too much. Pushing the reset knob inward resets the trip odometer, and turning it about 1/8 turn either direction should toggle KMPH/MPH functions.


Read here for more information:

http://www.installationinstructions.com/FYI/digitaldash.pdf

And here:

http://www.installationinstructions.com/FYI/digital_cluster_removal.pdf

Check this out for an unusual but fairly common failure:

http://www.installationinstructions.com/FYI/digital-failure.MPG
 
Top