I just found some excellent pics of the valve body, accumulators etc. in the factory service manual. Of course, this was after I finished installing all of my parts (guess I should have looked before). Well, I'm starting to second guess myself on a couple things now.
First, the service manual shows the 3-4 accumulator as going case- spring- piston- spacer plate. I KNOW that when I took mine out it was case- piston- spring- spacer plate. I also KNOW that I installed it in that order... which is right??
Second, the TV bore parts. The service manual shows clearly that the roll pin retaining the throttle valve, is actually installed inside the throttle valve, and not after it. Is it possible to install it after the throttle valve?? I hope not, but if it is at all possible, I will be pulling parts to verify how i have it installed.
Thanks for all your help!! My trans saga is nearing the end!!
Mike Jones
First, the service manual shows the 3-4 accumulator as going case- spring- piston- spacer plate. I KNOW that when I took mine out it was case- piston- spring- spacer plate. I also KNOW that I installed it in that order... which is right??
Second, the TV bore parts. The service manual shows clearly that the roll pin retaining the throttle valve, is actually installed inside the throttle valve, and not after it. Is it possible to install it after the throttle valve?? I hope not, but if it is at all possible, I will be pulling parts to verify how i have it installed.
Thanks for all your help!! My trans saga is nearing the end!!
Mike Jones