- Joined
- May 27, 2001
Competition Ready Stage 2 Motor with the following parts:
-4.020 bore,153 on center block,cross bolted front and rear mains
-6.5 inch wide journal Crower rods w/ 7/16 bolts
Crower Cams & Equipment
-LA Enterprises Kryptonite crank std mains .010 rods
Pankl Racing Systems Group
-Fully ported stage 2 heads
-Jesel rockers
Jesel Inc. - Valvetrain Innovation
-Custom Turbo People Solid Roller Cam
Turbo People of New York
-Duttweiler Wet Sump oiling system
-CAS sheetmetal oil pan
-sheetmetal intake I don't know the builder
-JW flywheel
J.W.Performance Transmissions
-Kooks forward facing twin turbo headers, Oncenter 3 inch Down Pipes and Wastgate Tubes (All Coated) Worth over $4000 new!!!
Kooks Custom Headers
MSD Billet Distributor
Welcome to MSD Ignition
The motor is totally fresh and ready for some action!!!
An identical combination has made close to 1300HP with old school 66MM turbos.
Just imagine what you could do with a new set of 67MM or 70MM!!!
FYI: This motor does not include a water pump, injectors or throttle body.
I would like $15,000 for this motor.
I have pictures for those who are interested.
Thanks in advance
-4.020 bore,153 on center block,cross bolted front and rear mains
-6.5 inch wide journal Crower rods w/ 7/16 bolts
Crower Cams & Equipment
-LA Enterprises Kryptonite crank std mains .010 rods
Pankl Racing Systems Group
-Fully ported stage 2 heads
-Jesel rockers
Jesel Inc. - Valvetrain Innovation
-Custom Turbo People Solid Roller Cam
Turbo People of New York
-Duttweiler Wet Sump oiling system
-CAS sheetmetal oil pan
-sheetmetal intake I don't know the builder
-JW flywheel
J.W.Performance Transmissions
-Kooks forward facing twin turbo headers, Oncenter 3 inch Down Pipes and Wastgate Tubes (All Coated) Worth over $4000 new!!!
Kooks Custom Headers
MSD Billet Distributor
Welcome to MSD Ignition
The motor is totally fresh and ready for some action!!!
An identical combination has made close to 1300HP with old school 66MM turbos.
Just imagine what you could do with a new set of 67MM or 70MM!!!
FYI: This motor does not include a water pump, injectors or throttle body.
I would like $15,000 for this motor.
I have pictures for those who are interested.
Thanks in advance