champion CNC iron heads

[thessman]

Fresh 8445 3.8 heads. CNC ported by champion . Polished combustion chambers, 1.77 /1.50 ferrea stainless steel valves with new 100 lb hydraulic springs, comp retainers,hardened keepers,posi valve seals on the intake and exhaust. The valve cover gasket surfaces are CNC milled for positive seal and the rocker arm pedestals are clearanced incase you are running roller rockers. These are fresh in the bags and ready to run ! 850.00 plus shipping . please add 3% for paypal.
thanks ! Steve

 

[getchasum]

Is the Champion "Name" CNC cut into the front side of them?

 

[SPOOLN]

Iron

Mine have the CNC name on them to, egr passage should be sealed with aluminum. Still very nice looking P@P heads !

 

[daves87gn]

"After cleaning and inspection the heat riser passage is filled with aluminum to enhance exhaust flow"

I dont see this done on these heads are u sure there Champion?

 

[pacecarta]

these heads look like they still have functional egr passages

are these the heads from your sig ?

 

[davidf]

Nice heads no doubt.

 

[pacecarta]

Nice heads no doubt.

agreed even if they are from the site in his sig they are a bargain and ready to ship, racing season is coming fast

 

[davidf]

Are the 100 lbs valve springs to much for stock cam/lifters?

 

[DCVING 6]

I think Champion will leave the EGR open if you have them do a set for you as opposed to just buying a set of a vendors shelf.

 

[Otto J]

Are the 100 lbs valve springs to much for stock cam/lifters?

If they are 100#s at seat, my opinion is no.

 

[nickygn]

steve send paypal address i'll take them

 

[thessman]

sold.... thanks nickyGN!