Bunch of parts, mostly stock, some race

[disco stu]

Progressive rate springs 50
Cloyes stock chain 25
Quarter stick 100
Accessories bracket 25
Stainless mandrel up pipe, nozzle hole 30
Stock chrome up pipe drilled nozzle hole 30
2 stock up pipes, each 25
3 turbo oil feeds, each 5
Used oil cooler lines 25
Stock upper and lower control arms 25
Egr solenoid 25
Egr valve 25
FG rear bumper and aluminum bumper brackets 200
Oil pump housing 25
Turbo heat shield cut for DP 25
2800 d5 convertor 75
Stock turbo, shaft play 25
3 inch MAF “dryer” hose 25
Chrome MAF pipe 50
Stock crack free ex manifolds 75
Steel center caps 75
Dual guage pods 3 led holes drilled 25
Stock rods and pistons 75
rocker stands for TA heads stock type 50
stock tank lines 25
lift bracket 5
intercooler brackets 20
stock oil drain 25
HD wastegate actuator 50
2 stock plenums each 25
62 mm tb 75
Heater manifold and hoses 25
HV front cover 50
TA heads, overported by Zimmerman
With champion intake, fuel rails, might be sweet for a
stroker or high RPM motor for this price 3000
MSD distributor 100
MSD 7al-2 for v8 tach signal NEW 400

6” narrow journal Carillo rods, coated
Std coated bearings that look new
JE spherical dish .015 9.0 CR $500

ALL PARTS USED UNLESS OTHERWISE INDICATED AND DO NOT INCLUDE SHIPPING AT

 

[disco stu]

NEW 325 50 MT DR and NEW 15x10 Rodlites. $700

 

[disco stu]

for sale pictures by halogrinder - Photobucket

 

[ALETTOCO]

do you have pictures of

6” narrow journal Carillo rods, coated
Std coated bearings that look new
JE spherical dish .015 9.0 CR $500

 

[daves87gn]

Stock crack free ex manifolds 75
Steel center caps 75
62 mm tb 75


6” narrow journal Carillo rods, coated
Std coated bearings that look new
JE spherical dish .015 9.0 CR $500

interested in top three how much shipped to 91710

and X2 on pics of rods and pistons

 

[kevinw25645]

i will take exhaust manifolds if they have not been welded and are for 86-87 any pics

 

[grandbeto]

rocker stands for TA heads stock type 50, Will they work for T&D roller rockers?

 

[Monte231SS]

stock tank lines and heater manifold with hoses....... I'll take these if they are not spoken for yet. PM me how you want your cash and a total shipped to 44130 Cleveland Ohio. Thanks

 

[dr_frankenstein]

I will take assecory bracket.

are you willing to sell the champion lower intake apart?

A.j.

 

[2toneNV]

Turbo heat shield cut for DP 25

John, I'll take this. Let you know when I come up that way. Sometime this week

 

[bison]

Could you the me the compression height and dish cc on the JE's?

 

[Sal 87WE2]

PM sent on Converter

 

[turbonut85]

What condition and how old is the HD actuator?? Price and brand on the dual fans?? 1st in line on these pending condition... Thanks. ---Keith

 

[Hot Air]

Info & Pics of DR's and Rodlites

Send info & pics on MT DR and Rodlites to me at alphaenvirmgt@vnet.net

hot air

 

[quadzila]

parts i need

these parts i need

aluminum crank pully & power steering pully
throttle body for my bgc intake 70mm if you have
ported stock intake

let me know thanks

 

[disco stu]

Did not get a chance to box stuff up and weigh it, sorry guys. Tomorrow.

Kevin, no cracks or welding on manifolds that I can see, but the heat shields have been off and tacked back on. No clue about that.

Beto, the stands are for the stock config single shaft type as the T&D

Dr. Frankenstein, its best to sell them as a package since the ports are matched to the heads.

Bison, the sheet is long gone. I measured comp height at 1.281"

Thank you for your interest.

 

[disco stu]

BTW the crown coating looks like that not from detonation but from injector erosion

 

[grandbeto]

Ok just let mo know the total prize I already send you two pm's, let me know on the dual fans

 

[disco stu]

$50 on the fans, once I find a suitable box I'll let you know total

 

[disco stu]

I also have a set of Alumistar 2.0 15x8 wheels with 3" BS. Obviously NOT Buick backspace.

$600