Buick Motorsport Stage II heads and Intake - Chapman ported

Squid4life

Well-Known Member
Joined
Jul 5, 2004
Slimming down my stash to cut down on crap on the shelves and raise some funds for the new car being delivered here soon.

I have another spare set of heads, by far my best, as well as a nice carbed intake converted to EFI. I don’t need multiple sets of heads or spare intakes, so they are up for sale. Both heads and intake are ported by Chapman Racing Heads, the best out there for stage 2 stuff. Heads are fresh, with 44cc combustion chambers. They are 100% ready to bolt on and run. They have Jesel rocker arms which are far superior to T&D’s. Rockers alone cost $1,400 new.

The intake is super nice as well. Has polished fuel rails, thermostat housing, AN fittings and fuel crossover/feed lines, is ready to bolt on.

If I were to sell separately I would ask $1,700 for the heads and rockers, and $600 for the intake. I would take $2,000 for the whole setup.


Not really interested in trades unless you might have:
Full body bushing kit and bolts
Large FMIC (RJC?)
Spoolfool fillers
GNX style wheels
Racetronix doublepumper
RJC pulleys
NICE GN steering wheel
NICE sun visors
???
 
ImageUploadedByTurboBuick1409882167.733672.jpg

ImageUploadedByTurboBuick1409882182.964286.jpg

ImageUploadedByTurboBuick1409882195.763855.jpg

ImageUploadedByTurboBuick1409882208.365231.jpg

ImageUploadedByTurboBuick1409882222.362621.jpg

ImageUploadedByTurboBuick1409882233.315026.jpg

ImageUploadedByTurboBuick1409882246.364849.jpg

ImageUploadedByTurboBuick1409882257.229038.jpg

ImageUploadedByTurboBuick1409882267.762793.jpg

ImageUploadedByTurboBuick1409882277.547484.jpg
 
TTT. Can work a deal for damn near a complete motor. Search for my other threads for sale.

I have:
stage ii block
stage ii crank
stage ii front covers
stage ii carb intake, converted to efi
stage ii carb intake
etc
 
Bump!!! More info on the heads:

Ti retainers and Ti valves. 44cc chambers. (Cc'ed).
.002 guide to stem clearance
2.300 stem ht
2.0 installed ht
225 seat pressure
525 seat pressure @ 1.4
Coil bind at 1.2
Valve face angle 44.5
Positive seals
 
Top