P powerwagon05 Member Joined Aug 8, 2008 Jun 29, 2009 #1 went to take out iac pulled wire off whole thing broke off in my hand like it had been cracked and just hanging on:frown: anybody have an idea how to get this out, plunger rod in the way for an easy out thanks for any help Attachments broke 002.jpg 62.7 KB · Views: 117
went to take out iac pulled wire off whole thing broke off in my hand like it had been cracked and just hanging on:frown: anybody have an idea how to get this out, plunger rod in the way for an easy out thanks for any help
C chrisgarrett Registered Member Joined Jun 2, 2004 Jun 29, 2009 #2 There are four Philips screws that hold the IAC housing to the throttlebody. Try and offset screwdriver.
There are four Philips screws that hold the IAC housing to the throttlebody. Try and offset screwdriver.
T Turbo T-type Member Joined Jun 4, 2006 Jun 29, 2009 #3 The same thing happened to me. I was able to jam a rather large flat bladed screw driver in the middle and unscrew it that way.
The same thing happened to me. I was able to jam a rather large flat bladed screw driver in the middle and unscrew it that way.
P powerwagon05 Member Joined Aug 8, 2008 Jun 29, 2009 #5 powerwagon05 said: thanks for the info ill give it a shot!! Click to expand... got it out and new one in car running good thanks agian:biggrin:
powerwagon05 said: thanks for the info ill give it a shot!! Click to expand... got it out and new one in car running good thanks agian:biggrin:
8 8UWITH6 Keepin' The Shiny Side Up Joined Dec 30, 2001 Jun 29, 2009 #6 Wow, how'd you pull that one off, ahaha
P powerwagon05 Member Joined Aug 8, 2008 Jun 29, 2009 #7 8UWITH6 said: Wow, how'd you pull that one off, ahaha Click to expand... jammed a chisel into opening then used a cresent wrench on chisel to back broken piece out, turned out to be pretty simple with help fro above posts
8UWITH6 said: Wow, how'd you pull that one off, ahaha Click to expand... jammed a chisel into opening then used a cresent wrench on chisel to back broken piece out, turned out to be pretty simple with help fro above posts