Blocks, cranks, heads, headers etc..

[Doug Jacobson]

I haven't had time in the past 5 years to do much of anything with these parts so I'm going to let them go, I'm sure I'll regret it.

109 block very clean std. never been touched. With caps, Ready for hone and assembly. $300 OBO

4.1 block standard, 484 casting all oily but a good block ready to be prepped. $200 OBO

Three 229 rolled fillet cranks, the two on the left are as pulled, std. The one on the right has been taken .010-.010 and is fresh. $175 each for the std cranks, $250 for the machined crank.

I also have a set of untouched 8445 heads complete with shafts and rockers. $100 for the pair OBO

A set of nice 2 dot rods, Make offer...

And a set of headers with crossover Drivers has been welded up, ready to bolt on. $125 obo.

All parts are located close to Omaha, NE. Shipping can be arrnged and quoted.

Thanks, Doug J

 

[Nick Micale]

Would you ship me the 4.1 block for $200?

 

[87gn1]

109 block

im interested on the 109 block and a stadard crank . how much for them . do the cranks need to be turned or just polished . pm me let me know thanks

 

[Doug Jacobson]

Nick, let me check on shipping and I will get back to you. I'm sure it will have to go by truck and I doubt that will be too cheap.

Let me take a Mic home tonight and I will measure and inspect the crank.

 

[87gn1]

im in omaha ne . i can just meet you and pick it up if it works out thanks

 

[Doug Jacobson]

One of the cranks and the 109 block are gone. Everything else still here

 

[Doug Jacobson]

Here is a picture of the headers.

 

[boostingbuick]

price on 4.1 block shipped to 27529 please.

 

[Doug Jacobson]

Everyone should have PM's on any questions

 

[Doug Jacobson]

4.1 sold pending payment

Thanks, Doug