Doug Jacobson
Altitude Compensated
- Joined
- May 24, 2001
I haven't had time in the past 5 years to do much of anything with these parts so I'm going to let them go, I'm sure I'll regret it.
109 block very clean std. never been touched. With caps, Ready for hone and assembly. $300 OBO
4.1 block standard, 484 casting all oily but a good block ready to be prepped. $200 OBO
Three 229 rolled fillet cranks, the two on the left are as pulled, std. The one on the right has been taken .010-.010 and is fresh. $175 each for the std cranks, $250 for the machined crank.
I also have a set of untouched 8445 heads complete with shafts and rockers. $100 for the pair OBO
A set of nice 2 dot rods, Make offer...
And a set of headers with crossover Drivers has been welded up, ready to bolt on. $125 obo.
All parts are located close to Omaha, NE. Shipping can be arrnged and quoted.
Thanks, Doug J
109 block very clean std. never been touched. With caps, Ready for hone and assembly. $300 OBO
4.1 block standard, 484 casting all oily but a good block ready to be prepped. $200 OBO
Three 229 rolled fillet cranks, the two on the left are as pulled, std. The one on the right has been taken .010-.010 and is fresh. $175 each for the std cranks, $250 for the machined crank.
I also have a set of untouched 8445 heads complete with shafts and rockers. $100 for the pair OBO
A set of nice 2 dot rods, Make offer...
And a set of headers with crossover Drivers has been welded up, ready to bolt on. $125 obo.
All parts are located close to Omaha, NE. Shipping can be arrnged and quoted.
Thanks, Doug J