Back to track

[dragway]

Went back this Saturday still not going good ran 13.14 @102 on street tires . The car just doesn't seem to mph after 1/8 . I don't know if I need a converter or something . 1.9 60ft the boost was at 20 on that run then I turned up to 22 and still ran 13.1 @102 with a 2.0 60 ft .

 

[john keskes]

1.9 on street tires is pretty good. what's your e.t. & mph in the 1/8 ? What fuel pump ? hotwire ? Scanmaster ? a lot of variables involved..

 

[Phoneguy]

That TA49 needs to be turned up !!!!!!!

Bryan

 

[forcefed3.8's]

What chip? The car should be in the 107mph range. It isn't as easy as just turning up the boost. You need fuel to go with it, if the chip was burned for more boost, it will be rich, less boost it will be lean. A non alky chip with alky will be rich.

 

[dragway]

I have tt chip for alky and a stock converter I haven't lock up converter and made a pass yet

 

[dragway]

Chip for 22-24 lbs I turned it up to 22 and I think it may have been pinging scan master didnt show it but o2 reading was lean 687

 

[forcefed3.8's]

What fuel pump. Check fuel pressure at WOT.

 

[dragway]

Walbro 340 hot wire scan master 83 mph et 8.48 in 1/8