another code 34 problem

[ssleeper94]

I've tried troubleshooting it from what i've read on the board. the car has a gen ll translator on it and a camaro lt1 maf. on the scanmaster w/ key on the af goes up when you press the pedal. i checked voltage at the connector the one had 12 one had 5 other was a good ground. I've tried a good working lt1 maf off my impala same camaro maf. Don't know where else to look.

 

[TurboBuRick]

How did you make your gen II connections? Plug and play harness? or?

 

[ssleeper94]

sp;iced. it has extender chip also not wired up yet if that makes a diference

 

[TurboBuRick]

Check the connections on the yellow and green wire. Refresh if necessary. Thats the maf signal in and out of the gen II.

 

[ssleeper94]

what you mean by refresh?

 

[TurboBuRick]

Cut off the splice connections on the green and yellow wire. Strip the ends and reconnect.