Alky Kit

[TurboTnZ06]

Used alkycontrol complete dual nozzle kit for 86/87 Buick. One M10 and one M15 nozzle. Alky pump rebuilt by Julio April 2018, never used after that or seen meth. New Accel 3 bar bosch style map sensor (yeah made in china, what isn't). New mini overflow tank for the actual coolant. Rest is original alkycontrol. Best mod ever for these cars. $400 shipped.

 

[Faspace]

I’m very interested is this bolt on ready to go ??

 

[TurboTnZ06]

Should be all you need. One long green wire not shown, that goes from MAP sensor to the controller under dash. Connect the low light tan wire, and run the long black power wire from controller to pump, and find power and ground under the dash. The ends should all be terminated. I'll include 3 splice connectors for the 3 power wires since they are cut to get thru the firewall. You may want to get an alky chip burned. You'll pull the speedo cover off, then you can put the LED from the kit in the Power Injection stock idiot light, which is neat. Also has low meth LED to put there in low fuel as well.

 

[TurboTnZ06]

Should be able to run it as single nozzle too, but would be close, I never tried it that way.

 

[TurboTnZ06]

Sold - pending payment.

 

[Faspace]

Did this sale?

 

[TurboTnZ06]

Sold.