This is something I fabbed up in an hour or so to replace the plastic cable tray under the oil pan. I needed it a little bigger to route the Alky line alongside the alternator feed.
There's not much to the fabrication It's 2 4" L shaped brackets welded together and I trimmed the ends down.
The 4" brackets are a little short that's why one hole is cut all the way through the edge.
There's not much to the fabrication It's 2 4" L shaped brackets welded together and I trimmed the ends down.
The 4" brackets are a little short that's why one hole is cut all the way through the edge.