.63 Q trim turbine housing

[mec108]

I need a 3 bolt .63 Q trim turbine housing.

 

[mec108]

...........

 

[gnmaster2004]

got one its a three bolt Precision $100 plus shiping

 

[mec108]

Sent you P.M

 

[REDS HOT AIR]

you dont happen to have a 4 bolt that your taking off do ya ?

 

[turbov6man]

Housing

I have one off a PT-70GTQ, already ported for an external gate. Let me know if your still looking.

 

[mec108]

I need a housing to fit a Q trim wheel not a GTQ? I was told that the new housings are cast only to fit the GTQ wheels!!!! Which are slightly bigger. PLEASE HELP

 

[REDS HOT AIR]

you dont happen to have a 4 bolt that your taking off do ya ?

I have a pte 3 bolt housing on mine and needing a 4 bolt (Q-trim)

im pretty sure its a .83 housing tho

I dont see a need for a .63 on a q-trim

but I will go look at mine shortly but prefer to trade for a 4 bolt housing

 

[mec108]

I have a pte 3 bolt housing on mine and needing a 4 bolt (Q-trim)

im pretty sure its a .83 housing tho

I dont see a need for a .63 on a q-trim

but I will go look at mine shortly but prefer to trade for a 4 bolt housing

Red; Please let me know if it's a .63 or .83 I don't have a 4 bolt sale or trade but I do have $$$$$$$ which should help you out.

 

[REDS HOT AIR]

actually its a pte .85

this thing had instant spool on a 30 over 109 engine with a 3500 converter .. if you have bad lag with a bb turbo you may want to look at other things

Im going to be putting it on a bigger engine so I need a 4 bolt housing

if you have a stock engine you just need a smaller turbo all together

 

[turbo6randy]

I don't have a 63, but do have a 82 Garrett housing that spools considerably easier than a 85 Precision housing if that is what you have now. Also it is for the older Q-trim. $100. shipped.
Randy

 

[REDS HOT AIR]

didnt think a q-trim wheel would fit in a garret 3 bolt housing

 

[qwknuf6]

I have a pte .63 for a q trim wheel . 100.00 shipped to ya , let me know

Mark

 

[turbo6randy]

didnt think a q-trim wheel would fit in a garret 3 bolt housing

Red
This was made by John Craig and has extra metal welded in for the large wheel.
Randy

 

[mec108]

I have a pte .63 for a q trim wheel . 100.00 shipped to ya , let me know

Mark

Mark; Sent you a P.M

 

[qwknuf6]

replied

 

[mec108]

I don't have a 63, but do have a 82 Garrett housing that spools considerably easier than a 85 Precision housing if that is what you have now. Also it is for the older Q-trim. $100. shipped.
Randy

RANDY; Doe's your (Garrett) housing have the wastegate mounted on the housing??

 

[turbo6randy]

mec108
No it doesn't. Can send you a pic if you're interested in it.
Randy

 

[mec108]

replied

Back to ya

 

[mec108]

mec108
No it doesn't. Can send you a pic if you're interested in it.
Randy

Can you. THANKS