5.3 and 4l60

[mcolor]

Can you take a 5.3 that was on a z71 and bolt it one a 4l60

Posted from the TurboBuick.Com mobile app

 

[TexasT]

If it has the correct bolt pattern on the bell housing.

Posted from the TurboBuick.Com mobile app

 

[mcolor]

If it has the correct bolt pattern on the bell housing.

Posted from the TurboBuick.Com mobile app

Ok I was thinking sense it was 4x4 it won't fit

Posted from the TurboBuick.Com mobile app

 

[TexasT]

The 4l60e will need a tail housing for where the transfer case bolts up unless you plan on using a transfer case.
Probably much easier to find one from a 2 wheel drive.

Posted from the TurboBuick.Com mobile app

 

[mcolor]

The 4l60e will need a tail housing for where the transfer case bolts up unless you plan on using a transfer case.
Probably much easier to find one from a 2 wheel drive.

Posted from the TurboBuick.Com mobile app

I believe I will wait for a 2wd because I want to make this as easy as possible thanx for the advice

Sent from my SPH-L710 using TurboBuick Mobile mobile app

 

[Chuck Leeper]

Moved to LSX tech forum.