4.1 Stock block or Stage1 stroked rotating assembly

[ttypewhite]

That has been SOLD

 

[hufsredo]

PM sent

 

[ttypewhite]

Replied, all that's left is the rotating assembly gents.

 

[KWIKR 1]

Mike PM me a price on the rods and pistons if the other will take the crank . I may "bite" on it . Thanks....Tim.

 

[hufsredo]

If you still have the assembly, pm me I would like to make you on offer.

 

[49-blues]

Are you sure about the assembly specs? According to my calculations they total at 9.3875" and given a deck height of 9.535" -that would put the piston in the cylinder bore -.1475"?

 

[ttypewhite]

The block was o-ringed at first and machined out.

 

[ttypewhite]

If you still have the assembly, pm me I would like to make you on offer.

Check your pms.

 

[ttypewhite]

ttt

 

[spoolinturbo6]

rotating assembly

what bore size are the pistons for?

 

[49-blues]

I think he mentioned 4.00" pistons,so it may be about 4.005".

 

[ttypewhite]

I think he mentioned 4.00" pistons,so it may be about 4.005".

Yes sir, you are correct.

 

[spoolinturbo6]

rotating assmembly

I have a 4.1 that has 20 over pistons in it so I dont really know engine measurements. I am asking if my engine is 20 over will your pistons work??

 

[49-blues]

If you open up your bores to .015"-.020".

 

[ttypewhite]

If you open up your bores to .015"-.020".

I appreciate the help with the specs, if you are going to Bowling Green this year let me know. Beers on me:biggrin:

 

[spoolinturbo6]

stroker rotating assm.

I was wondering why the motor was taken apart? it seems like you just put it together and ran it all last summer with the new pistons?

 

[ttypewhite]

Thats easy, sell my short, and build a StageII short or a V8.

 

[ttypewhite]

ttt

 

[ttypewhite]

ttt