200 4r valve body tube

[onequicks10]

The 200 4r I'm puting in to my truck had a bent pan, when I removed the pan I noticed that the valvebody tube had also been bent. Does anybody have an idea where I can pickup a new tube. I need to pick up a hardened stator shaft today at the local trans shop, and I'm going to check with them.
Thanks,
Jason

 

[mikestertwo]

Where are you located?

 

[onequicks10]

I'm located in Jacksonville, Florida.
Jason

 

[onequicks10]

I just made the rounds to the parts stores to try to find some single wall tubing with no luck. I did pick up a piece of brake line with the same OD, will the little bit of difference in ID of the double wall tubing give me a problem.
Thanks,
Jason

 

[onequicks10]

Did some more research and still no luck on finding a new tube, so i bent the brake line and sanded down the ends to fit into the VB. There was only .012 difference between the single wall stock tubing and the double wall brake line, so i don't think it will cause a problem.
Jason